ICMCTF 2026 Friday Morning
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Friday, April 24, 2026 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8:00 AM | 9:00 AM | 10:00 AM | 11:00 AM | |||||||||
| IA1-FrM |
Effect of Alumina Coating and Testing Condition on Tribological Behaviors and the Oxidative Potential of Brake Wear Particles
|
Memristive Effects in PEO Alumina: Mechanisms and Technological Implications
|
Advanced Coating Strategies to Combat Friction and Wear in Low-Viscosity Fuel Systems
|
Cu Grain Engineering and Plating Process Reliability Study for Heterogeneous Integration
|
BREAK
|
Surface Property Enhancement of Al 7075 Alloy via MAO-Based Boron-Reinforced Composite Coatings
|
Advanced HiPIMS Coating Equipment for High-Performance Cutting Tools Amid Tungsten Price Increase
|
Designing Porosity for Function: Polymer-Templated Metal Oxides for Catalysis and Broadband, Wide-Angle Optics
|
||||
| MC1-2-FrM |
Active Friction and Wear Control in a-C:Cr Films: Electrical Current and Polarity Effects on Catalytic Graphitization
|
Bubble-Assisted Electrochemical MXenes as Novel Sustainable Solid Lubricant
|
Tribological Performance of Sputter-Deposited MoS2 Coatings with Varying Process Gases
|
Effect of Ta Content in ta-C:Ta Coatings on the Machining Performance of Aluminum Alloy
|
Tailoring Titanium Nitride Thin Film on Magnesium Substrate to Improve Adhesion and Tribological Performance
|
BREAK
|
Mxene Based Functionalisation of Ceramic Coatings Produced by Plasma Electrolytic Oxidation of Light Alloys
|
Experimental Investigation of Friction, Wear, and Dielectric Behavior of Hybrid Polymer Nanocomposites for Insulated Bearings with Machine Learning Assisted Optimization
|
Atomistic Mechanisms of Carbon Film Formation in Tribological Conditions Explored by Machine Learning Molecular Dynamics
|
Influence of TiNbN PVD Coating on Cutting Force Reduction during End Milling of Al/Si₃C Metal Matrix Composites
|
||
| MC3-3-FrM |
High-performance ta-C-based coatings for tribological applications deposited by laser-arc technique
|
Effect of Boriding on the Surface Hardness and Wear Resistance of Low Carbon Steel Fabricated by Wire Arc Additive Manufacturing (WAAM)
|
Tribological Performance of Epoxy Coatings for Semi-Rigid Packaging Applications
|
The Development of Amorphous-Based Multi-Component Alloys for the Nanocomposite Coatings and their Properties
|
Enhancement of Tribological Properties of Graphene Oxide/MoS2 Composite Coatings Prepared on Textured Biomedical Implants by Electrophoretic Deposition Method
|
BREAK
|
Ultralow Wear, Conductive Plasma-Enhanced Atomic Layer Deposited Metal Nitrides
|
Ultra–High Vacuum Tribology: Industrial Relevance, Mechanisms, and Research Gaps
|
New Carbon High Productivity / Low Temperature Coater with New Temperature Measurement and New Colour Coating
|
Corrosive Wear Mechanisms and Corrosion Performance of WC-Reinforced Fe–iN625 Coatings Fabricated by Laser Cladding
|
||
| PP2-3-FrM |
Experiments and Modelling of High Power Impulse Magnetron Sputtering Discharges with Metallic Target
|
Knowing and Controlling the Dynamic Plasma Potential and Sheath Voltage as Key Elements in Plasma-Based Deposition
|
Electrocatalytic Performance of AlCrCoNiFeX (X = C, O)HighEntropy Alloy Films for Oxygen and Hydrogen Evolution Reactions
|
Effect of Ti Interlayer Thickness on Residual Stress and Energy Relief Efficiency in γ-Mo2N/Ti Thin Films
|
Low-Temperature Synthesis of Ti2AC (A = Si or Ge) Max-Based Coatings via Highly Ionized Growth Techniques
|
BREAK
|
Superposition of HiPIMS with RF on a Single Magnetron: Generation of High Ion Energies
|
|||||