ICMCTF 2026 Monday Afternoon
Sessions | Time Periods | Topics | Schedule Overview
Hover over a paper or session to view details.
Click a Session in the first column to view session papers.
| Session | Monday, April 20, 2026 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1:40 PM | 2:40 PM | 3:40 PM | 4:40 PM | |||||||||
| CM3-1-MoA |
Predicting Outcomes of Thin-Film Synthesis from First Principles
|
A Refined Toolbox for Predicting Phase Formation in PVD Thin Films
|
Pathways for the Preparation of Functional Coatings by Multiscale Modelling
|
BREAK
|
The Intersection of Energy, Entropy, and Exploration: Data-Driven Discovery of High-Entropy Materials
|
Optimal Catalysts for Methane Pyrolysis by Atomistic Modelling of Molecule-Surface Interactions
|
Multiscale Simulations from Precursors and Surface Chemistry to Thin Film Properties
|
|||||
| MA1-2-MoA |
Synergistic Effects of Ta and Si Alloying on the Longterm Oxidation and Hot Corrosion Resistance of Ti–Al–N Coatings
|
Fabrication, Characterisation and Tribological Testing of Magnetron Sputtered Cr Coated Zr Alloy Cladding for Enhanced Accident Tolerance in Light Water Reactors
|
Second Phase-Driven Surface Engineering Strategies for Corrosion and Oxidation Protection of Mg–8Al–4Ca Alloy
|
Optimization of Plasma Spray Parameters of 316L Stainless Steel Coating Using Taguchi Method
|
Statistical Correlation between Microstructural Features and Process Forces in Conventional and Ultrasonic-Assisted Milling of Plasma Claddings
|
BREAK
|
Oxidation Resistance of Binary and Ternary Nitrides Obtained by Magnetron Sputtering
|
Adaptive Opto-Neuromorphic Device Based on Monolayer MoS₂ for Extreme-Temperature Cognitive Operations
|
Reactive Sputtering of CrMoNbWxTiCy Carbide Films by High Power Impulse Magnetron Sputtering System: Effect of W and Carbon Contents
|
Materials for Aerospace Extreme Environments
|
||
| MA4-1-MoA |
Focused on Synthesis; Innovative Material Solutions: Bridging Research and Application
|
Advanced Multicomponent Layers for High-Performance Tool Steels
|
Charge Trapping Behavior in BN Films Fabricated by a Reactive Plasma-Assisted Coating Technique and Their Design Strategies
|
Development of TiB₂:h-BN:a-C Based Nanocomposite Coatings with Enhanced Wear and Corrosion Resistance for Turbojet and Gas Turbine Components
|
BREAK
|
Energy Efficiency in Pulsed-DC Powder-Pack Boriding: A Sustainable Approach to Surface Hardening of Metallic Materials
|
Investigation of Technologically Driven Compositional and Structural Changes, Mechanical Properties, and Alloying of Transition Metal Diboride Thin Films
|
|||||
| MB2-1-MoA |
Optical and Electrical Properties of Nitrogen-doped p-type Cu2O Thin Films Prepared by Reactive HiPIMS
|
Fabrication and Manipulation of Weakly-Interacting Interfaces for Optoelectronic Applications
|
Stability and Interlayer Formation at Epitaxial P-Type Oxides and Ga2O3 Interfaces
|
Investigation of High-temperature Morphology and Electrical Performance of YZr-alloyed Amorphous Al₂O₃ Thin Films
|
BREAK
|
Ion-Beam Assisted Deposition of P-Type Oxide Semiconductor Thin Films in Room Temperature
|
Influence of Bonding Temperature on Electromigration Suppression in Cu-Doped Ag Bumps
|
Piezoelectric MEMS – from Advanced Material Systems to Novel Device Architectures
|
||||
| PP1-2-MoA |
Thick Uniform Coatings on Hollow Glass Microspheres via DC Magnetron Sputtering
|
Investigation of the Relationship Between Film Texture and Hydrogen Barrier Characteristics in HCD-IP ZrN Thin Films on Zircaloy-4
|
Spherical Tungsten Coating as Inertial Fusion Targets
|
BREAK
|
||||||||
| TS1-2-MoA |
Protective Coatings in Hydrogen Technologies: Degradation Mechanisms and Key Parameters for Standardized Testing
|
Parameter-Sensitive Ex-Situ Corrosion Testing of Coated and Uncoated PEMWE Bipolar Plates
|
Advances in Operando and In Situ Cross-sectional Characterization of Thin Films for Battery and Hydrogen Applications
|
Atomic Layer Deposition for Enhancing Durability of Fuel Cell Catalysts
|
BREAK
|
Electrocatalytic Performance Analysis of FeNixMoWCu High Entropy Alloy Thin Films: Effects of Ni Content
|
Development of FeNiMoWCuN and FeNiMoWCuC High Entropy Alloy Thin Film as Efficient Electrocatalysts for Water-splitting Applications
|
Fluorine-Doped Tin Oxide Aerogel Support for Pt Catalysts: Enhancing Hydrogen Evolution Reaction via Sustainable Interface Engineering
|
High-Entropy Oxide Thin Films for Sustainable Battery Applications
|
|||